This article explains how to set up MDaemon to route outgoing messages to a specific smart host for relaying to a recipient's mail server.
From the MDaemon server interface, follow these instructions:
- Click Setup
- Select Default Domain/Servers...
- Click Delivery
- Select the option: Send all outbound email to the 'Server' specified below
- In the Server field, enter the IP address or host name of the smart host.
Note: The smart host is normally your ISP's SMTP server. (example: 192.0.2.124 or 'example.com' ) - Click Ok
If the smart host requires authentication before it will accept messages from your server:
- Under Access to the above mail server:
- Enable the option: ...requires authentication
- Enter the user name/password that is used for authenticating to the smart host.
- Click Ok
If the smart host requires a POP3 check before it will accept messages from your server:
- Under Access to the above mail server:
- Enable the option: ...requires a POP3 check
- Enter the host or IP address to which you wish to connect and the user name/password of the account.
- Click Ok